EXCELLENT
page 22
10 Cooling system (special equipment)
If the waterbath is fitted with a cooling device
for quicker cooling of the bath liquid, the “water
supply“ has to be connected by a hose f.ex. to a
cold water supply line. The “discharge“ has to
be lead into a drain.
(Use temperature resistant material for the
tubing)
Please note, that the outflowing water may be hot!
The discharge must be connected with tubing to an appropriate container or sink. Make sure, that the
tubing cannot be clogged or bended, and that it continually runs downhill.
11 Cleaning and maintenance
By regular cleaning of the easy to clean the tank, residues are
avoided which at continuous influence can impair the outfit and
function of the water-/oilbath.
Please use only detergents and antiliming agents appropriate for
stainless steel for the cleaning of the tank and the housing (stainless
steel detergents usual in the trade)!
Water baths only:
After cleaning and after draining the water the
stainless steel tank must be rinsed thoroughly with clear water
and dried carefully!
water supply
discharge
It is important to ensure that no rusting objects come into contact with the stainless steel bath tank or the
stainless steel housing. Rust sediments lead to contamination.
If rust stains caused by contamination occur on the tank surface, the affected areas must be cleaned and
polished immediately.
On units with gable cover we recommend that the hinge bolts are oiled from time to time if the bath is
used frequently.