D33363 | Date 06/2016
27
Operation and control
5.4.4 Manual mode
In this operating mode, the appliance runs in permanent operation at the values set on the
ControlCOCKPIT.
Adjustment options
j
p
As described in chapter 5.4.2, you can set the following parameters after pressing the cor-
responding activation key (in any sequence):
Temperature
p
Adjustment range: model dependent (see nameplate and technical
date on page 13)
Heating operation is indicated by the
symbol.
You can select °C or °F as the temperature unit displayed (see
page 37).
24
.4°C
TEMP
180
.4
°C
Set
Air flap position
p p
Adjustment range: 0 % (closed, recirculating operation) to 100 %
(completely opened, fresh air operation) in steps of 10%
FLAP
%
40
Fan speed
p
(only for UFxx/IFxx appliances)
Adjustment range: 0 to 100 % in steps of 10%
FAN
%
50
5.4.5 Operation with digital backwards counter with target time setting,
adjustable from 1 minute to 99 days (Timer)
In timer operation, you can adjust the time the appliance runs at the set value.
1. Press the activation key to the left of
the timer display. The timer display is
activated.
FA
FA
TIMER
-
Ende 9:00 23.11.
--
h
-
m
2. Turn the turn control until the desired
duration is displayed – in this example 4
hours 30 minutes. The approximate end
time is shown beneath, in a smaller font.
TIMER
End
0
13:30 23.11.
04
m
h
3
Up to a duration of 23 hours 59 minutes, the time is displayed in hh:mm (hours:minutes)
format. For 24 hours and more, the format dd:hh (days:hours) is used. The maximum
duration adjustable is 99 days 00 hours.
