8
Assembly Instructions
1. Before installing the bottom shelf brackets, make
sure:
A)
the ledges of both bottom shelf brackets
face each other
B)
the bottom shelf bracket equipped
with door stop must be located in the front
C)
the
side of Cart Legs having a threaded hole for Door
Bracket must face inwards. Refer to
ILL. 1
.
Install the bottom shelf brackets between cart legs.
Align the threaded holes on the ends of bottom shelf
bracket with the holes on cart legs. Screw loosely
using 8 of the "B" 1/4" x 2-1/2" phillips head screws.
Insert the screw through the Cart Leg, then
match the screw end with the threaded hole on
the Bottom Shelf Bracket.
Secure each Caster to the bottom of the Cart Leg
by turning the threaded caster stem clockwise until
full stop. Fasten firmly using the Customized Wrench.
(included in hardware pack) See
ILL. 2.
Remove all cart parts, hardware, and grill head from shipping box. Raise the grill lid and remove all packed
components. Use the parts list on page 5, 6, and 7 to check that all necessary parts have been included.
Assemble the gas grill on a protective work surface to avoid scratching grill surfaces. Inspect your grill for
damage as you proceed. Do not assemble or operate your grill if it appears damaged. If there are damaged
or missing parts when you unpack the shipping box, or you have questions during the assembly process, call
8:00am - 4:30pm CST, Monday through Friday at: 1-800-770-9769.
HINT:
2.
3.
Assembling The Cart
While it is possible for an individual to assemble this gas grill, we recommend asking for the assistance of
another person when maneuvering some of the larger or heavier pieces. You may need both
Adjustable Wrench
and
Phillips Screw Driver
(not provided) for securing the nuts and scews.
B.
1/4" x 2 1/2" PHILLIPS HEAD SCREW x 8
ILL. 2
CASTER
(P5115B)
ILL. 1
CART LEGS
LEFT(P0842
C
)
CART LEGS
RIGHT(P0842
D
)
BOTTOM SHELF
BRACKET, front(P1034
S
)
BOTTOM SHELF
BRACKET, rear(P1034
T
)
DOOR STOP
THREADED HOLE FOR
DOOR BRACKET