Put the 2 "AA" batteries into Tank Gauge Display.
Shown in
ILL. 11
.
Put the Tank Gauge Display into the hole on the
side burner Control Panel. See
ILL. 12
.
Attach Tank Gauge to the left Side Panel as shown
in
ILL13
. Align the 2 holes on the Side Panel with
the thread holes on the Tank Gauge. Fix firmly by
using 2 of the "E" 1/4" x 1/2" Phillips head screws.
Attach the Tank Hook to Tank Gauge. Align the
2 holes on the Tank Hook with the holes on the
Tank Gauge. Fix firmly by using 2 of the "E" 1/
4" x 1/2" Phillips head screws.Assemble the Tank
Holder in the same steps as Tank Hook.
Insert the terminal of the connection cable from the
Tank Gauge into Terminal on the left side of the
Tank Gauge Display See
ILL14
.
Install the Rear Wind Shield to the back of grill
cart. Fix securely using 2 of the "K" 3/16" x 1/
2" phillips head screws. See
ILL.15
E.
1/4" x 1/2" PHILLIPS
HEAD SCREW x 6
21.
b.
Tank Gauge Installation - See ILL. 11, 12, 13, 14
a.
d.
e.
c.
Assembly Instructions
13
Install the Heat Indicator by inserting it into the hole
on upper left side of Grill Lid. Adjust it to level position,
then tighten securely using lock washer and wing nut
provided in the Heat Indicator box. See
ILL.16.
22.
ILL. 11
"AA" BATTERY
ILL. 12
TANK GAUGE
DISPLAY
(P80N4A)
K
.3/16"X1/2" PHILLIPS
HEAD SCREW x 2
ILL. 13
CONNECTION
CABLE
TANK
HOOK
(P4041A)
TANK
HOLDER
(P4042A)
TERMINAL
ILL. 14
CONNECTION
CABLE
ILL. 15
REAR WIND SHIELD
(P8089C)
ILL. 16
HEAT INDICATOR
WING NUT
GRILL LID
TANK GAUGE
(P80N5A)