Meltem M-WRG-S/Z-24, Operating Instructions Manual

Page: 26 / 32

Operating instructions
M-WRG-S/Z-S, M-WRG-S/Z-24,
M-WRG-S/Z-EIB, M-WRG-S/Z-KNX (-F, -FC) ventilation units
- 26 -
Meltem Wärmerückgewinnung GmbH & Co. KG
Am Hartholz 4 · D-82239 Alling
info@meltem.com · www.meltem.com
VENTILATION THE RIGHT WAY
V E N T I L AT I O N & H E AT R E C O V E R Y
14.3.1 Remove cover from ventilation unit
► Using both thumbs, press the two latches
(item 1 in Fig. 13) on the bottom of the
ventilation unit. The cover will come away.
► At the same time, push your index fingers
into the gap between the cover and
housing, and lift the cover up from the
housing.
14.3.2 Remove air filters
► Turn the filter ring (item 1 in Fig. 14) using
the hand grip (item 2 in Fig. 14) anti-clock-
wise until the arrow on the filter ring
(item 3 in Fig. 14) lines up with the arrow
at the removal position (item 4 in Fig. 14).
► Pull the filter ring together with the extract
air filter out of the ventilation unit.
► Turn the filter cover (item 6 in Fig. 14)
using the hand grip (item 7 in Fig. 14)
anti-clockwise until the arrow (item 8 in
Fig. 14) on the filter cover lines up with the
arrow at the removal position (item 9 in
Fig. 14).
► Pull the filter cover together with the
supply air filter out of the ventilation unit.
► Detach the extract air filter from the filter ring.
► Detach the supply air filter from the filter cover.
► Dispose of extract air and supply air filters with the non-recyclable waste. The regulations
and statutory requirements in your own country concerning disposal should be followed.
► Clean the filter ring and filter cover with a damp cloth if they are dirty (see section 15).
Fig. 13: Remove cover from the ventilation unit
Fig. 14: Remove air filters