manualshive.com logo in svg

Meltem M-WRG-II E Series, Maintenance Instructions Manual, Page: 3 / 28

Share
Download
Meltem M-WRG-II E Series Maintenance Instructions Manual Download Page 3

- 3 -

Maintenance instructions 

M-WRG-II P... / M-WRG-II E ventilation units

Meltem Wärmerückgewinnung GmbH & Co. KG

Am Hartholz 4 · D-82239 Alling

[email protected] · www.meltem.com

VENTILATION  THE  RIGHT WAY

V E N T I L A T I O N   &   H E A T   R E C O V E R Y

8.7.2 

Clean duct adapters (for surface-mount ventilation units with ductwork connection)   ...  15

8.7.3 

Clean duct adapters (for flush-mount ventilation units with ductwork connection) 

 .......  15

8.7.4 

Clean duct adapters (for U

2

 integrated into wall ventilation units)   ................................  15

8.8 

Clean supply air ducts on intermediate plate   ................................................................  16

8.9 

Check heat exchanger for soiling   .................................................................................  16

8.10 

Insert new extract air filter 

 .............................................................................................  17

8.11 

Insert new outdoor air filter 

 ...........................................................................................  18

8.12 

Switch on ventilation unit and check functions   .............................................................  19

8.13 

Attach unit cover to ventilation unit   ...............................................................................  19

8.14 

Reset filter change indicator 

 .........................................................................................  20

8.15 

Enter completed maintenance in maintenance schedule A   ..........................................  20

9 

Maintenance schedule B – carry out every 5 years (specialists only)   ..................  21

9.1 

Switch off power to the ventilation unit 

 ..........................................................................  21

9.2 

Remove cover from ventilation unit and clean   ..............................................................  22

9.3 

Remove extract air filter 

 ................................................................................................  22

9.4 

Remove outdoor air filter 

 ..............................................................................................  22

9.5 

Remove electronics compartment covers and intermediate plate   ................................  23

9.6 

Remove heat exchanger   ...............................................................................................  24

9.7 

Clean heat exchanger   ...................................................................................................  24

9.8 

Insert heat exchanger   ...................................................................................................  25

9.9 

Insert and secure intermediate plate and electronics compartment covers   ..................  26

9.10 

Clean flat ducts/flexible pipes 

 .......................................................................................  27

9.11 

Insert air filters, carry out function test and attach unit cover 

 .......................................  27

9.12 

Enter completed maintenance in maintenance schedule B   ..........................................  27

Summary of Contents for M-WRG-II E Series





























Reviews:

No comments