manualshive.com logo in svg

Meltem M-WRG-II E Series, Maintenance Instructions Manual, Page: 14 / 28

Share
Download
Meltem M-WRG-II E Series Maintenance Instructions Manual Download Page 14

- 14 -

Maintenance instructions 

M-WRG-II P... / M-WRG-II E ventilation units

Meltem Wärmerückgewinnung GmbH & Co. KG

Am Hartholz 4 · D-82239 Alling

[email protected] · www.meltem.com

VENTILATION  THE  RIGHT WAY

V E N T I L A T I O N   &   H E A T   R E C O V E R Y

8.6 

Clean filter base on extract air side if necessary

 

► Check the filter base on the extract 

air side (item 1 in Fig. 9) for soiling.

 

► Clean the filter base if necessary:

 

►

Cover the heat exchanger (item 2 

in Fig. 9) with a lint-free cloth. 

This will prevent dirt getting inside 

the heat exchanger.

 

► Clean the filter base with a 

vacuum cleaner (see section 7.1 

on page 11).

NOTICE

 

► When cleaning, be careful not 

to damage the optional humidity 

sensor (item 3 in Fig. 9) or optional 

CO2 sensor (item 4 in Fig. 9).

8.7 

Clean air grilles or duct adapters

8.7.1 

Clean air grilles (for surface-mount or flush-mount ventilation units without 

ductwork connection)

 

►

Clean the air grilles (item 1 in Fig. 10) 

with a damp cloth and mild soapy 

water.  

You can take out the air grille if 

necessary. To do this, carefully push 

the two retainers (item 2 in Fig. 10) 

outwards and pull the air grilles 

forward and out.

 

►

Insert the air grilles once more after 

cleaning.

Fig. 9: 

Clean filter base on extract air side if 

necessary

1

2

3

4

Fig. 10: 

Clean air grilles (for surface-mount or flush-

mount without ductwork connection)

1

1

2

2

Summary of Contents for M-WRG-II E Series





























Reviews:

No comments