BLADE LEVER
• The lever is conveniently located above the on/
off switch so it can easily be adjusted while the
clipper is in your hand.
• The lever adds versatility to the clipper by
allowing a gradual change to the length of a
cut without an attachment comb.
• When the lever is in the uppermost position, the
blades will give the closest cut leaving the hair
very short. Pushing the lever gradually downward
increases the cutting length.
• In its lowest position, the lever will leave the hair
approximately the same length as a #1 comb.
• The lever will also extend the blade’s life
as a longer cut requires less work from the blades.
• While the clipper is running, move the Lever
from “close cut” to “longer cut” a number of
times. This will help keep cut hair away from the
blades. If the clipper stops cutting, and the method
above does not help, then the blades are blunt
and need to be replaced.
IMPORTANT SAFEGUARDS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be followed,
including the following:
To reduce the risk of death or injury by electric shock:
• Unplug this appliance before cleaning.
• Do not place or store the appliance where it
can fall or be pulled into a bath or sink.
• Do not use while bathing or showering.
• Do not place in, or drop into, water or other
liquid.
• Do not reach for an appliance that has fallen
into water. Unplug immediately.
To reduce the risk of burn, electric shock, fire or
injury to persons:
• Use this appliance only for its intended use as
described in this manual. Do not use attachments
not recommended by the manufacturer.
• This appliance should never be left unattended
when plugged in.
• Close supervision is necessary when this
appliance is used by, on, or near children or
people with reduced physical, sensory or
mental capabilities.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never operate this appliance if it has a
damaged cord or plug or if it has malfunctioned.
• Keep the cord away from rough, sharp or
heated surfaces.
• Do not pull, twist, or wrap the cord around
the appliance.
• Never drop or insert any object into any
opening in this appliance.
• Before use, ensure that the blades are correctly
aligned.
• Do not place the appliance on any surface
while it is operating.
• Do not use this appliance with a damaged or
broken comb nor with teeth missing from
the blades as injury may occur.
INSTRUCTIONS FOR HAIR CUTTING
Before using clippers to cut hair:
1. Inspect the clipper, making sure that it is free
of oil between the cutting blade teeth. Switch
on the unit to distribute the oil and to ensure
that it is running smoothly. Wipe off any excess
oil. This should be done after each use. Unwind
and straighten the cord during use in order to
avoid tangling.
2. Ensure that the person that is going to have
their hair cut is properly seated and that the
hair to be cut is at eye level. This allows easy
visibility while cutting and complete control of
the clipper.
3. Before cutting hair, brush/comb the hair so that
it is straight & tangle free.
4. Place a towel around the neck and shoulders of
the person having the haircut.
REMINDERS
• Cut the hair in a relaxed and slow manner.
Use short strokes and work gradually over the
entire head.
• Always take off a little hair at a time; you can
Close cut
Longer cut
20800_IM.indd 3
2013/03/05 10:32:08 AM
