4. Cleaning and Maintenance
4.1. Disconnect the appliance from the mains power
supply and allow it to cool completely before undertak-
ing any cleaning task.
4.2. Clean the outer parts of the appliance with a damp
cloth and then dry. CAUTION! Do not immerse electrical
parts of the appliance in any liquid.
4.3. Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
4.4. Never submerge the appliance in water or any
other liquid or place it under running water.
4.5. During the cleaning process, take special care with
the blades, as they are very sharp.
4.6. Clean the blades and the guide combs with the
cleaning brush. Remove the hairs from the blades and
from inside the appliance with the brush. It is important
to clean off remaining hairs after each use.
5. Anomalies and repair
5.1. Take the appliance to an authorised support centre
if product is damaged or other problems arise.
5.2. If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.
.
DIAGRAM 8
