ES
EN
not operating. It may damage the
grinder.
The dots on the adjuster knob
indicate the fineness of the grind.
MODE SELECTION
The device has three different
settings: default setting, ECO mode
and speed mode. In ECO mode,
the appliance helps to save more
energy. In speed mode, the user
can make their coffee faster than in
default setting.
Below you will see a table with the
active functions of each Mode:
To select the desired mode:
When the machine is in standby
condition, press and hold the ON/
OFF Button (G) for 5 seconds,
and it will start to flash. The next
buttons will give you the following
indications:
*Note: What is Pre-brewing? The
pre-brewing function moistens the
grounded beans in the brewer with
a small amount of water before full
extraction. This expands the coffee
grounds to build up a greater
pressure in the brewer which help
extraction of all the oils and full
flavor from the grounded beans.
–
–
–
–
–
–
–
ECO
mode
ECO
mode
No
Lights
ON
Lights
ON
Yes
10min
Yes
Yes
Flas-
hing
Flas-
hing
Flas-
hing
Flas-
hing
Flas-
hing
Flas-
hing
Flas-
hing
No
30min
Yes
Yes
Yes
20min
Yes
Speed
mode
Speed
mode
Default
mode
Default
mode
Illumina-
tion light
Hot
water
button
(H)
Pre-
brewing*
Strong
coffee
button (I)
Auto shut
off time
Mild
espresso
button
(J)
Cup
volumen
memory
To change the mode, press the hot
water button (H) for ECO mode,
strong espresso button (I) for speed
mode and mild espresso button
(J) for default setting. Two “beeps”
indicates that the mode is being
selected.
If you want to keep the settings
without any change, press ON/
OFF button again or wait for 5
seconds and the device will return
to standby mode.
Cleanign and
Maintenance
DAILY CLEANING
Cleaning and maintenance of the
appliance are very important to
prolong its useful life.
Remove the external drip tray (1).
