EN
Choose a safe and stable surface
with an easily reachable power
supply and allow minimum distance
from the sides of the machine.
Insert the external drip tray (1). It
has magnets to facilitate assembly.
Make sure it is inserted correctly.
Fill the water tank with water (see
“FILLING THE WATER TANK”).
bean (see “FILLING THE COFFEE
BEAN CONTAINER”).
Unwind and straighten the power
cord and insert the plug into the
socket located on the back of the
machine. Insert the other end of
the power cord into a wall socket
with suitable power voltage.
Daily Operation
COFFEE
Switch on the appliance by
pressing the ON / OFF button (G).
The appliance will be in standby
mode.
(4) and adjust the height of the
Depending on the size of the
cup (too tall or too wide) you can
remove the drip tray (1) or adjust
the position of the drip tray as
indicated in (Fig.1).
prefer, press the strong espresso
button (I) or the mild espresso
button (J).
The espresso button pressed will
light on and stay on indicating that
the appliance is preparing the cup
When the appliance is back to
to serve.
AUTOMATIC CLEANING
DEACTIVATION
Open and remove the service door
(10) (See Fig 2 and 3)
Press and hold the ON / OFF
button for a few seconds until 2
“beeps”.
That indicates that you have
disabled self-cleaning.
To reactivate it, repeat operation,
until you hear 2 “beeps”.
Priming:
proceed to prime the pump. To
do this, simply press the hot water
icon (H) until a continuous stream of
water comes out.
TIP:
is recommended for espresso
adjusted (see Section OTHER
CONFIGURATIONS / Volume of
FILLING THE WATER TANK
tank is at a low water level and
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
