appliance if the surface is dirty. When the appli-
ance re-heats the dirt will become more difficult to
remove.
5. Anomalies and repair
5.1. Take the appliance to an authorised support
centre if product is damaged or other problems
arise.
5.2. If the connection to the mains has been dam-
aged, it must be replaced and you should proceed as
you would in the case of damage.
6. Trouble shooting
E0
No cooking pot is on the cooking
surface or the pot is made from
unsuitable materials for the induc-
tion cooker.
Place suitable cooking equipment on the plate.
E1
Voltage is below 100V
Ensure that the appliance is connected to a volt-
age indicated on the rating label.
E2
Voltage is above 270V
Ensure that the appliance is connected to a volt-
age indicated on the rating label.
E3
Temperature detector of the plate
has short circuited or overheated.
Wait for the unit to cool down, if the problem
persists take the appliance to an authorised sup-
port centre.
E4
IGBT thermostat is open
Take the appliance to an authorised support
centre.
E5
The temperature detector of radiator
has short circuited or overheated.
Wait for the unit to cool down, if the problem
persists take the appliance to an authorised sup-
port centre.
E6
IGBT thermostat has overheated
Wait for the unit to cool down, if the problem
persists take the appliance to an authorised sup-
port centre.
E7
Surface thermistor malfunction
Take the appliance to an authorised support
centre.
46043.indd 5
2019-03-04 12:20:16 PM
