This appliance complies with Directive 2006/95/
EC on Low Voltage and Directive 2004/108/EC
on Electromagnetic Compatibility.
apply a downward pressure to the feeder while
guiding the feeder inside the tube.
- When processing large quantities of food, remove
the feed tube and current accessory to remove all
excess processed food.
Once you have finished using the appliance:
- Stop the appliance using the on/off switch.
- Unplug the appliance from the mains.
- Clean the appliance.
Carry handle/s:
- This appliance has a handle on the side of the body,
which facilitates comfortable transport.
Cleaning
- Disconnect the appliance from the mains and allow
it to cool before undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
- Do not let water or any other liquid get into the air
vents to avoid damage to the inner parts of the appli-
ance.
- During the cleaning process, take special care with
the blades, as they are very sharp.
- It is advisable to clean the appliance regularly and
remove any food remains.
- The following pieces may be washed in the top rack
of dishwasher:
- Pusher
- Feed tube
- Grate Drum
- Slicing drum
- Shredding drum
- Fine Shredding drum
Anomalies and repair
- Take the appliance to an authorised technical
support service if problems arise. Do not try to
dismantle or repair without assistance, as this may
be dangerous.
- If the connection to the mains has been damaged,
it must be replaced and you should proceed as you
would in the case of damage.
26888_IM.indd 4
26888_IM.indd 4
2011/03/14 03:59:41 PM
2011/03/14 03:59:41 PM
