Mellanox Technologies MetroX TX6240, Hardware User Manual

Page: 17 / 112

Installation Rev 1.1
Mellanox Technologies 17
2.3 Package Contents
Before installing your new system, unpack the system, and check, against the parts list below,
that all the parts have been sent. Check the parts for visible damage that may have occurred
during shipping.
The MTX6240-2F_BL package content is as follows:
• 1 x MTX6240-2SFS system
• 1 x 3R transponder (MEX6200):
• MEX6200 unit
• 4 x Optical module, 10GbE SFP+, LC-LC, DWDM C-Band, 40km. CH#28 up to CH#31
• Ethernet cable
• Mellanox passive ribbon fiber hybrid enable, MPO to 8XLC, 0.5m
• 3m RS-232 terminal cable
• Power cords
• AC power: 3m power cord equipped with the appropriate plug
• Kit for rack installation: 19", 23" (if ordered), or 600 mm ETSI (if ordered)
• Fiber tray
• 8 x Flat Phillips screws
• 4 x Phillips pan-head M6 screws
• 4 x M6 cage nuts
• 1 x Rail kit
• 2 x Power cable for each power supply unit – Type C13 to C14, length 183cm
• 1 x Harness DB9 to RJ-45
• 1 x Mellanox® optical module, 40Gb/s, QSFP, MPO, 850nm, SR4L up to 30m
• 1 x Mellanox® passive fiber hybrid cable, MPO to 8xLC, 5m
• 1 x Quick Start Guide
The MTX6280-2F_BL package content is as follows:
• 1 x MTX6280-2SFS System
• 1 x 3R transponder (MEX6200):
• MEX6200 unit
• 4 x Mellanox® optical module, 10GbE SFP+, LC-LC, 850nm, SR up to 300m
• 4 x Optical module, 10GbE SFP+, LC-LC, DWDM C-Band, 80km. CH#28 up to CH#31
• Ethernet cable
• Mellanox passive ribbon fiber hybrid enable, MPO to 8XLC, 0.5m
• 3m RS-232 terminal cable
• Power cords
• AC power: 3m power cord equipped with the appropriate plug