Grid Director 4036E Installation Manual
43
9.
Align the short bracket holes with the rack holes of the correct U level and secure them
using two rack screws on each side (not provided by Mellanox).
10.
Go to the rear of the rack.
11.
On each side, align the long bracket holes with the rack holes of the correct U level and
secure them using two rack screws (not provided by Mellanox) and two rail screws.
12.
Tighten the rack screws (rack screws are not supplied).
13.
Tighten the long brackets to the mounting bars.
Important:
This step should be done last.
