ConnectX®-4 VPI Single and Dual QSFP28 Port Adapter Card User Manual for Dell PowerEdge
Rev 1.3
Mellanox Technologies
39
7.2
0068F2/0NNJ2M Specifications
Table 7 - 0068F2/0NNJ2M Specifications Table
Physical
Size:
2.71 in. x5.6 in. (68.90mm x 142.24 mm) – low profile
Connector:
Dual QSFP28 (Copper and optical)
Protocol Support
InfiniBand:
IBTA v1.3
Auto-Negotiation
a
: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane),
QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per
lane), EDR (25Gb/s per lane) port
a. The ConnectX-4 adapters supplement the IBTA auto-negotiation specification to get better bit error rates
and longer cable reaches. This supplemental feature only initiates when connected to another Mellanox
InfiniBand product.
Ethernet:
100GBASE-CR4, 100GBASE-SR4, 50G-R2 (EC), 40GBASE-CR4,
40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 25GBASE-CR/CR-S,
25GBASE-SR, 25GBASE-LR, 25G-R (EC), 10GBASE-SR, 10GBASE-LR,
10GBASE-ER, 10GBASE-CX4, SGMII / 1000BASE-X
Data Rate:
SDR/DDR/QDR/FDR/EDR– InfiniBand
10/25/40/50/100 Gb/s – Ethernet
PCI Express Gen3:
SERDES @ 8.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Power and
Environmental
Voltage:
12V, 3.3V
Typical Power
b
: Passive Cables:
16.12W
b. Typical power for ATIS traffic load.
Maximum Power: Passive Cables:
18.04W
2.8W Active Cables:
24.80W
Maximum power available through QSFP28 port:
2.8W
Temperature:
Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity:
90% relative humidity
c
c. For both operational and non-operational states.
Air Flow:
See
Airflow Specifications on page 40
Regulatory
Safety:
CB / cTUVus / CE
EMC:
CE / FCC / VCCI / ICES / RCM
RoHS:
RoHS-R6
