background image

ConnectX®-4 VPI Single and Dual QSFP28 Port Adapter Card User Manual for Dell PowerEdge

Rev 1.3

Mellanox Technologies

54

Appendix E:  Sicherheitshinweise (Warnings in German)

1. Installationsanleitungen    

2. Übertemperatur  

3. Bei Gewitter - Elektrische Gefahr       

4. Anschließen/Trennen von -Kupferkabel  

5.    Geräteinstallation  

6. Geräteentsorgung   

7. Regionale und nationale elektrische Bestimmungen t

Lesen Sie alle Installationsanleitungen, bevor Sie das Gerät an die Stromversorgung 
anschließen.

Dieses Gerät sollte nicht in einem Bereich mit einer Umgebungstemperatur über der 
maximal empfohlenen Temperatur von 55°C (131°F) betrieben werden. Es ist ein Luft-
strom von 200 LFM bei maximaler Umgebungstemperatur erforderlich. Außerdem 
sollten mindestens 8 cm (3 in.) Freiraum um die Belüftungsöffnungen sein, um einen 
einwandfreien Luftstrom zu gewährleisten.

Arbeiten Sie während eines Gewitters und Blitzschlag nicht am Gerät, schließen Sie 
keine Kabel an oder ab.

Kupferkabel sind schwer und nicht flexible. Deshalb müssen sie vorsichtig an die 
Anschlüsse angebracht bzw. davon getrennt werden. Lesen Sie die speziellen Warnun-
gen und Anleitungen des Kabelherstellers.

Diese Gerät sollte nur von geschultem und qualifiziertem Personal installiert, aus-
getauscht oder gewartet werden.

Die Entsorgung dieses Geräts sollte unter Beachtung aller nationalen Gesetze Bestim-
mungen erfolgen.

Dieses Gerät sollte unter Beachtung der regionalen und nationalen elektrischen Bes-
timmungen installiert werden.

This equipment should be installed in compliance with local and national elec-
trical codes.

Summary of Contents for ConnectX-4 Lx


























































Reviews: