9
4. Making coffee
• Ensure that the appliance is connected to the power
source.
• Open the lid on the water tank
.
• Fill the water tank with the desired amount of water
using the therm jug. With the help of the water level
display on the tank
you can choose the correct
number of cups. Small cup symbol = approx. 85ml
coffee per cup, large cup symbol = approx.
1
25 ml
coffee per cup.
• Close the lid on the water tank and place the therm
jug with closed lid in the appliance.
• Open the
swing
filter
to the left.
• Fold a Melitta
®
filter bag
1
x4
®
at the embossed seam
and place it in the filter holder
. Press the filter
bag into the filter holder by hand, to ensure a good
fit.
• Put the ground coffee into the filter. The amount
depends on your personal taste. We recommend
using 6 g of ground coffee per large cup.
• S
wing
the filter back into the appliance. An audible
click tells you it is inserted properly.
• With the Melitta
®
AromaSelector
®
you can
set the taste of your coffee with just one hand:
From mild-aromatic ( ) to strong-intensive ( ).
• Turn the appliance on
. Brewing begins.
• The appliance switches off automatically at the latest
1
5 minutes after being switched on. This avoids
unnecessary use of electricity and saves energy. You
can of course turn the machine off manually at any
time.
• The drip stop prevents your coffee from dripping,
when you remove the pot from the appliance
.
• With the help of the detachable inner filter you can
dispose of the filter bag simply and easily.
5. Using the insulated jug
• The brewed coffee flows through the central valve in
the insulated lid of the jug.
• To pour coffee press down on the sealing lever
.
• Remove the lid simply by pressing the seals on the
side while lifting the lid up
.
6. Cleaning and maintenance
External cleaning
• The housing can be cleaned with a soft damp cloth.
• The jug lid, the filter insert and the
swing
filter
can
be washed in the dishwasher.
Descaling
The CALC button
lights up again if the appliance has
been turned off without descaling. The CALC
button will go off again only after the descaling
programme has been completely finished.
Based on the water hardness level you have set (see
point 3) the descaling programme should be run
promptly after the CALC button
lights up.
• Follow the manufacturers instructions regarding
amounts and pour the descaler into the water tank.
We recommend using
Melitta
®
„Anti Calc Liquid for
Filter Coffee & Aqua Machines“
.
• Briefly press the CALC button
, it will start to flash.
• The descaling process will now run automatically.
To remove even stubborn limescale the descaling
process takes 25 minutes.
•
Attention:
Only by carrying out the descaling
process completely will all limescale deposits be
removed and the light on the CALC button will go
off. The descaling process should therefore not be
interrupted before it has run for the full 25 minutes.
• When the descaling process is completed the light
on the CALC button will go off. The appliance will
turn off automatically.
• At the end of the descaling process, the appliance
should be rinsed twice through, using the maximum
amount of water without coffee. This will remove
any remaining limescale deposits.
7. Note on disposal
• Appliances labelled with this symbol
are subject
to european guidelines for Weee (Waste electrical
and electronic equipment).
• Electric appliances do not go in the household bin.
Dispose of the appliance in an environmentally
friendly way using suitable collection systems.
• Packaging materials are raw materials and can be
recycled. Please recycle them.
GB