Operating Instructions: Melitta
®
Solo
®
& Perfect Milk
|
1830-0618 | 2018-08
30
Transport, Storage and Disposal
GB
Troubleshooting
Malfunction
Cause
Measure
Coffee only
fl
ows drop-by-
drop.
Grinding
fi
neness is too
fi
ne.
Adjust the grinding
fi
neness more
coarse.
Clean the brewing unit.
Perform a descaling or cleaning
programme if necessary.
Coffee does not
fl
ow.
Water tank not
fi
lled or
incorrectly inserted.
Fill the water tank and make sure it
is properly inserted.
The brewing unit is clogged. Clean the brewing unit.
The grinder is not grinding.
The beans are not falling
into the grinder.
Tap lightly on the bean container.
Foreign objects in the
grinder.
Call the hotline.
Loud grinder noise.
Foreign objects in the
grinder.
Call the hotline.
Bean symbols
are
fl
ashing although the bean
container is full.
Insuf
fi
cient quantity of
ground beans in the
brewing chamber.
Press the
button or
button.
Appliance indicates "no
water" even though the water
tank is
fi
lled.
illuminates on the
display.
The
fl
oat is blocked.
Check the condition of the
fl
oat in
the water tank, remove the water
and carefully shake the tank.
The
symbol is illuminated
without a reason.
There is air in the lines
inside the appliance.
Turn the valve switch
11
clockwise
until the stop until water
fl
ows out of
the appliance.
Clean the brewing unit if necessary.
The cleaning or descaling
process was interrupted.
The power supply was
interrupted, e.g. due to a
power outage.
The appliance performs a rinsing
program autonomously. To do
so, follow the instructions on the
appliance.
Not enough milk froth is
formed during the frothing
process.
The control dial of the
Cappuccinatore is in the
wrong position.
Adjust to the proper position.
The Cappuccinatore is dirty.
Take the Cappuccinatore apart and
clean it.
The brewing unit can no
longer be reinserted after
removal.
The brewing unit is not
properly locked.
Check whether the handle for
locking the brewing unit is correctly
engaged.
The actuator is not in the
proper position.
Switch the appliance off and
then on again. Press the
and
buttons simultaneously
for longer than 2 seconds. The
actuator is put into position. Then
reinsert the brewing unit and make
sure it is correctly locked into place.
