ENGLISH
109
11.4 Integrated descaling programme
The integrated descaling programme removes limescale in the interior of
the appliance. It requires a total of approximately 25 minutes. The symbol
for descaling flashes during the entire process.
Prerequisite: The appliance must be switched off (see 89
„Switching on and off“ ).
Caution!
–
Carry out the integrated descaling programme every 3 months
or when the descaling symbol illuminates on the display.
–
Only use Melitta
®
ANTI CALC Espresso Machines descaling
agent. These descaling products are exactly designed for the
Melitta
®
CAFFEO
®
LATTEA
®
.
–
Never use vinegar or other descaling agents.
Run the integrated descaling programme as follows:
1
Before descaling, remove – if in use – the Melitta
®
Claris
®
water
filter from the water tank.
2
Remove the milk canister.
3 Simultaneously press both the button for two-cup dispensing
and the ON/OFF button
for about 3 seconds.
→
The symbol for descaling is flashing.
The symbol for the drip tray is illuminated.
Phase 1
During Phase 1, one bean symbol
is shown on the display.
4
Empty the drip tray and coffee grounds container.
5 Reinsert the drip tray
without
the coffee grounds container and
place the coffee grounds container under the milk shower.
→
The symbol for the water tank illuminates.
Heft_Lattea_Fernost_2_3.indd 109
12.05.2014 15:15:43