![background image](http://html1.mh-extra.com/html/melissa/16540011/16540011_quick-manual_1767512020.webp)
20
UK
ASSEMBLY
•
Fit the wall bracket to the wall so that the
hoses reach down to the floor.
•
Hang the appliance on the wall bracket.
•
Screw the appliance securely to the wall
bracket so that it cannot accidentally fall
off.
USE
1. Plug in.
2. Insert the hoses into the boots or shoes to
be dried.
3. Turn the timer button to the required set-
ting. The appliance will start.
5. Once the timer button reaches the “0”
position, the appliance goes off automati-
cally. If further drying is necessary, simply
set the timer again.
Warning:
To avoid drying out the material in
shoes/boots with delicate materials, do not
leave the appliance to run for too long at a
time. It is better to divide the drying process
into two shorter periods.
Overheat protection
A thermal cut-out automatically switches the
appliance off if it is overheating.
If the appliance is turned off due to overheat-
ing, follow the instructions below:
•
Switch off the appliance (unplug it).
•
Remove the cause of the overheating (e.g.
materials covering the air intake or pre-
venting free air circulation, dust, lint, etc.).
•
Allow the appliance to cool for a few min-
utes.
•
Then turn the appliance back on.
CLEANING
When cleaning the appliance, you should pay
attention to the following:
•
Turn off the appliance and unplug it before
cleaning.
•
Do not submerge the appliance in water,
and do not let water enter the appliance.
•
Vacuum the grilles to remove any dust or
lint.
•
Clean the appliance by wiping it with a
damp cloth. Do not use detergents of any
kind.