![background image](http://html1.mh-extra.com/html/melissa/16530021/16530021_manual_1767516020.webp)
20
holes at the bottom of the back of
the appliance (triangle markings).
Ensure that the 2 clamps at the
top of the mount are level with the
2 holes at the top of the back of
the appliance. Press the clamps in
so that they lock into place with a
click (fig. 3).
Use
1. Connect the appliance and switch
it on using the on/off button (2).
2. Turn the thermostat button (3)
clockwise to the maximum setting.
Let the thermostat button stay in
this position until the desired room
temperature has been reached.
3. Turn the thermostat button anti-
clockwise until you hear a click
and the thermostat switches off.
This means that the thermostat
setting now corresponds to the
actual room temperature.
4. The heating ribs (1) will activate
and deactivate automatically to
maintain the temperature that has
been set.
5. Always turn off the appliance
using the on/off button and unplug
it when you are finished with it.
Please note that the appliance will
remain hot for a while after you
switch it off.
Caution! The appliance is equipped
with overheat protection which
automatically stops the appliance
if it becomes too hot during use
or if a technical fault occurs. Turn
the appliance off, remove the plug
from the mains socket and allow the
appliance to cool down before using
again. Should the appliance be faulty,
it should be repaired by a professional.
Frost protection
If you wish to avoid the room
temperature falling below +5 ºC,
e.g. because you will be away for
prolonged periods, you can turn
the thermostat button to the frost
protection setting.
CLEANING
When cleaning the appliance, you
should pay attention to the following:
• Remove the plug from the mains
socket, and allow the appliance
to cool down completely before
cleaning it.
• Never submerge the appliance
in water and make sure no water
enters the appliance.
• Clean the appliance by wiping
it with a damp cloth. A little
detergent can be added if the
appliance is heavily soiled.
• Do not use scouring pads,
steel wool or any form of strong
solvents or abrasive cleaning
agents to clean the appliance,
as they can damage the external
surfaces of the appliance.
• Keep the ventilation openings free
of dust and dirt.
• IMPORTANT! Allow to dry
completely after cleaning. Do not
use the appliance if it is damp.
• Always clean the appliance before
putting it away if it is not to be
used for a prolonged period.