19
• Caution! Do not touch the
appliance while it is in use.
Surfaces that radiate heat may get
hotter than 60 ºC.
Cord and plug
• Check that it is not possible to
pull or trip over the cord or any
extension cord.
• Keep the cord and appliance away
from heat sources, hot objects
and naked flames.
• Do not use with other cords than
that supplied.
• Turn off and unplug the appliance
as soon as you have finished
using it, before cleaning it or if
the appliance is not in use. Avoid
pulling the cord when removing
the plug from the socket. Instead,
hold the plug.
• Ensure that the cord is fully
extended.
• The cord must not be twisted or
wound around the appliance.
• Check regularly that neither cord
nor plug is damaged and do not
use if they are or if the appliance
has been dropped in water or
damaged in any other way.
• If either the appliance, cord or
plug has been damaged, have
the appliance inspected and
if necessary repaired by an
authorised repairer. Never try
to repair the appliance yourself.
Please contact the store where
you bought the appliance for
repairs under the guarantee.
Unauthorised repairs or
modifications to the appliance will
invalidate the guarantee.
KEY TO THE MAIN COMPONENTS
OF THE APPLIANCE
1. Heating ribs
2. On/Off button
3. Temperature control dial
4. Wall fitting
PRIOR TO FIRST USE
• Remove all packaging and
transport materials from the inside
and outside of the appliance.
• Check that the appliance has
no visible damage and that no
parts are missing. Do not use the
appliance if it is damaged.
USING THE APPLIANCE
Installation
1. Press down the 2 clamps on the
top of the wall mount (4) and push
the mount down so that it loosens
from the appliance (fig. 1).
2. Drill 4 holes in the wall with an
internal distance that matches
the 4 holes in the wall mount, and
install the mount on the wall using
the 4 screws supplied (fig. 2).
There must be a clearance of at
least 50 mm from the bottom and
sides of the appliance and 150
mm from the top of the appliance
to ensure sufficient ventilation (fig.
4).
3. Install the appliance on the wall
mount: Hook the 2 hooks at the
bottom of the mount into the 2
1.
2.
3.
4.
4.
