20
UK
USE
•
Place the motor unit (6) on a flat surface
and make sure it is standing firmly. You
can press the motor unit’s suction cups
securely against the surface if it is flat and
smooth.
•
Place the drinking glass (3) on the table
with the opening facing upwards.
•
Pour food into the drinking glass. Solid
food such as fruit and vegetables must
be cut into squares no bigger than 18×25
mm.
•
NOTE! Never add liquid or food above the
maximum mark on the drinking glass.
•
Check that the seal (4) is correctly posi-
tioned in the groove on the blade unit (5)
and screw the blade unit on to the drinking
glass.
•
Place the drinking glass on the motor
unit’s drive shaft and turn the drinking
glass gently clockwise to the locked posi-
tion.
•
Plug in.
•
Place a hand on the drinking glass and
press the on/off button to blend.
•
Release the on/off button when you have
finished blending. Wait until the blade has
come to a complete stop.
•
Remove the drinking glass from the motor
unit and unscrew the drinking glass from
the blade unit. Screw the lid (2) in place
and insert the straw (1) through the hole in
the lid.
•
The drink is now ready.
CLEANING
•
Always clean the appliance immediately
after use.
•
Unless clearly specified in the cleaning in-
structions below, please note that none of
the parts of this appliance are dishwasher
safe.
•
Always switch the appliance off at the wall
socket and unplug before cleaning.
•
Clean the motor unit by wiping it with a
damp cloth. Do not immerse the motor unit
of the appliance in water and make sure
no water gets into the motor unit.
•
All other parts can be washed up in soapy
water. All parts must be completely dry
before the appliance is assembled and
used again.
• Be careful not to touch the sharp edges of
the blades during cleaning!
•
Never use abrasive detergents or sol-
vents.