16
Helpline
If you have any problems with or questions about HP COMFORT:
• read this instruction manual carefully, as it will help you resolve most problems.
• consult our website: www.meliconi.com
2 YEAR WARRANTY
In any eventuality, you can send an e-mail to: [email protected]
SIMPLIFIED EU DECLARATION OF COMPLIANCE
The manufacturer, Meliconi S.p.A., hereby declares that the radio device,
HP COMFORT headphones
is
compliant with Directive 2014/53/EU (RED). The full text of the EU Declaration of Compliance
is available at the following internet address:
www.meliconi.com/doc/hpcomfort
If the headphones do not produce any sound, or if the audio signal is distorted or is presumed to come from another
source, carry out the following procedure:
1. Place the headphones onto the base
2. Make sure that the AC adaptor is fully inserted into the power outlet and that the cable is properly connected to the
connector
13
from the base (DC IN).
3. Make sure you use fully charged batteries. If necessary, recharge them.
4. Make sure the TV or audio equipment is turned on and plays an audio signal.
5. Remove the headphones from the base and make sure that the RED SIGNAL light
10
on the base remains
constantly on when there is an incoming audio signal. If necessary, increase the volume of the audio source.
6. Move closer to the base, turn on the headset and check the RED
2
(POWER) led lights up.
7. On the headset, check that the GREEN led is on
3
. If there is no audio in the headphones, use the headphone
volume control
7
(wheel) to adjust the sound level; if necessary, press the AUTO TUNE button for a moment and
wait.
8. If the problem persists, turn the headphones off, and using the selector
14
on the base, try to change channels (1-
2-3) and repeat the procedure from point 6 onwards.
Troubleshooting
Cuffia Senza Fili HP Comfort 140x200 5 lingue.indd 16
Cuffia Senza Fili HP Comfort 140x200 5 lingue.indd 16
03/08/18 14:35
03/08/18 14:35
