W+ Button
a. RGB channel will mix to three different white: warm white, nature white and cold white by short press
For example: first press---warm white, press again---nature white, third press again—cold white, fourth
press—warm white………………
b. Fast click twice to switch off RGB channel.
W+
W+
Save and recall button
Save color: select zones from
select a color from
long press one save button
from S1,S2,S3 for 2-3 second
LED lighting flash twice
indicate save successful
a.
b. Save running mold: select zones from
select a moving mode from
long press one save button from
S1,S2,S3 for 2-3 second
LED lighting flash twice
indicate save successful
c.
Recall: select zone button which we want recall from 1-4, then short press save button S1,S2,S3.
Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used complies with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6) Please ensure that the cable is secured tightly to the connector.
7) For latest information please visit our website www.melec.com.au.
Warranty Agreement
1) We provide lifelong technical assistance with this product:
5 year warranty. Every product has printed date on, for example: 1125 means year 2011, week 25.The warranty
is for free repair or replacement and covers manufacturing faults only. For faults beyond the 5-year warranty we
reserve the right to charge for time and parts.
2) Warranty is void if:
Any defects are caused by wrong operation.
Any damages are caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of components.
Any damages are due to transportation, vibration etc. after purchase.
Any damages are caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages are caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated or changed.
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Factory Reset
By pressing & holding the learning button on the ML-1009FAWI for over 5 seconds the connected LED Light will
flash, All previous Remote controls have now been deleted.
