MELAG Vacuklav 23 B+, Technical Manual, Page: 7 / 24

2 Installation requirements
7
The steam sterilizer works with a cooler on the rear of the device. The function and life-span of the steam
sterilizer can be compromised if heat dissipation via the cooler is restricted in any way. The steam sterilizer
may only be installed if sufficient air circulation can be guaranteed.
Additional space requirement for the feed water supply
Additional space is required for a storage container or a water treatment unit. It is also necessary to
guarantee free access to the hoses and cables leading from the steam sterilizer to the water treatment
unit.
Space requirements MELAdem 40 MELAdem 47
Water treatment unit Pressure tank
Width 32 cm 40 cm --
Height 35 cm 46 cm 40 cm
Depth 16 cm 18 cm --
Diameter -- -- approx. 28 cm
Requirements for the installation of a device
If the installation of the device is mandatory, one of the following measures must be implemented:
1. It must be possible to pull out the device for operation (pos. a).
2. There must be an exhaust air shaft in the rear area of the installation space that discharges the warm
air upwards (pos. b).
3. There must be an exhaust air shaft in the rear area of the installation space that discharges the warm
air to the rear (pos. c).
4-5 cm
a
b
c