z
Pressing the
READ
key again will toggle back and forth between the length, width and height
measurement on the upper portion of the screen;
z
Press SET key to clear the data on the portion of the screen, and then can begin the new
calculation of volume;
●
To choose measurement mode, press
SET
key again.
Tips:
Press the SET key one by one will toggle back and forth between the length, area, volume
and length measurement. If there are datum on the display, first pressing the SET key will clear
the current datum, and the mode will be invariable.
Addition of volumes under volume mode:
z
Press M key to save the calculated volume of first time measurement, and the “M+” icon will
appear on LCD;
z
Press
SET
key to clear the current displayed data, then can begin the second time
measurement and computation (Follow step 1 to 3 under the volume section).
z
After getting the calculated volume of second time, press
+/=
key to enter the addition mode.
A “+” icon would appear on LCD;
z
Press RM key to recall the first calculated volume for the addition. The “M+” icon will
disappear and the stored memory will be automatically cleared;
z
Press
+/=
key, the sum of both volumes is shown on the lower portion of the screen;
z
Repeat the steps above to keep adding the measured volume.
Temperature display
Press and hold
SET
key and at the same time press the RM key, the environment temperature
will appear on the lower portion of screen (the unit is
℃
if the distance unit is M, while the unit
is
℉
if the distance unit is ft/in), and press the
READ
key again to return the measuring state.
7
