MEITRACK T399G Vehicle Tracker User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 8 -
1.
When speeding is detected, the device can control buzzer sounds.
2.
When unauthorized ignition or GPS antenna cut-off is detected, the engine will not be able to start.
3.
When iButton triggering is detected, the device can control engine startup.
4.
When input or output status is detected, the output will be active or inactive.
2.1.6
Idling Detection
This function is used to detect whether a vehicle's engine is switched off while parking. To enable the function, you
must connect input 2 to ACC detection.
When the device detects that the driving speed is 0 and the ACC is on for one consecutive minute (default time), an
idling alert will be generated.
For details, see section 6.5.6 "Setting Idling Time – D34."
2.1.7
Changing I/O Port Mode
This function is used to change the I/O port mode. For example, change active negative input to analog port or
positive input.
For details, see section 6.5.5 "Setting I/O Port Status – C08."
2.1.8
Auto Arming
You can enable the auto arming function by B27 command, Meitrack Manager software or MS03 tracking platform.
This function is disabled by default.
When the device is in sleep mode and the function has been enabled, the device will enter auto arming state.
You can set disarming by B21 command or remote control.
Function
Call
GPRS
SMS Output 1
Buzzer Description
Open
vehicle
doors in
arming
state
√
√
√
√
When a vehicle door is opened without permission,
the device will dial the authorized phone numbers in
sequence and send a vehicle theft alert by SMS or
GPRS. The buzzer will not stop buzzing until the
arming state is disabled.
Start the
engine in
arming
state
√
√
√
√
√
When the engine is started in arming state, the
vehicle fuel will be cut off, and the device will dial the
authorized phone numbers in sequence and send a
vehicle theft alert by SMS or GPRS. The buzzer will not
stop buzzing until the arming state is disabled.
Set
arming
while
moving
(Intercept
moving
vehicles)
√
√
√
When the stolen vehicle is moving, you can set arming
by B21 GPRS or SMS command to intercept the
vehicle. When the vehicle speed is lower than 5 km/h
and the arming has been set, the vehicle fuel will be
cut off, and the device will send an alert to the
authorized phone numbers.
Note: You cannot use the remote control to set
arming when the vehicle is moving.
Tow
vehicles
√
√
√
When the ACC is off and the vehicle vibrates
continuously, a towing alert will be generated. The
