MEITRACK T399G Vehicle Tracker User Guide
Copyright © 2018 Meitrack Group All rights reserved. - 19 -
5: low output
6: PWM output
7: Buzzer alert output
8: 1-Wire
3.
You can set one or multiple input ports at the same time. The command
0000,C08
is used to read I/O port
parameters.
Note:
1.
IO0:
Mn
parameter value is 4, 5, or 6.
2.
IO1:
Mn
parameter value is 0, 4, 5, 7, or 8.
3.
IO2:
Mn
parameter value is 0, 1, or 2.
4.
IO3:
Mn
parameter value is 0, 1, or 2.
5.
IO4:
Mn
parameter value is 0, 1, 2, or 3.
Example:
Sending: 0000,C08,IO0:5
Reply: 353358017784062,C08,IO0:5,IO1:0,IO2:2,IO3:2,IO4:1
6.5.6
Setting Idling Time – D34
SMS sending: 0000,D34,
Time
SMS reply: IMEI,D34,OK
Description:
Time: When the device detects that the driving speed is 0 and the ACC is on (input 2 activated) for consecutive several
minutes, an idling alert will be generated.
Value range: 0–65536; unit: minute; default value: 1 minute
Example:
Sending: 0000,D34,1
Reply: 353358017784062,D34,OK
For details about SMS commands, see the
MEITRACK SMS Protocol
.
Note:
1.
The default SMS command password is
0000
. You can change the password by using Meitrack Manager and
SMS command.
2.
The device can be configured by SMS command with a correct password. After an authorized phone number is
set, only the authorized phone number can receive the preset SMS event report.