16
Stop Time:
•
Press the [Select] button – “PROGRAM & STOP” will flash on display.
•
Press the [Select] button - the hours will flash.
•
Adjust the hours using the [+] or [-] buttons.
•
Press the [Select] button - the minutes will flash.
•
Adjust the minutes using the [+] or [-] buttons.
•
Press the [Select] button - the TIMER will blink
•
Select TIMER ON (black icon) or OFF (white icon) using the [+] or [-] buttons.
•
Press the “On/Send” button to send the information to the thermostat.
Batteries Replacement
When the batteries are low, the display of the remote control will dim.
If the batteries will not be replaced the display will turn off completely.
•
Pull the batteries cover down to reveal the batteries.
•
Remove the old batteries.
•
Wait for 10 minutes before installing the new batteries.
•
Install two new AAA batteries – Pay attention to the polarity.
•
Return the batteries cover to place.
Important:
The remote control will not operate unless at least 10 minutes pass between removing
the old batteries and installing the new ones.
