MeisterCraft MDR 280 FT, Translation Of The Original Instructions

Page: 57 / 166

57
h If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust
related hazards.
4 Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be
controlled with the switch is
dangerous and must be repaired.
c Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools.
Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to
operate the power tool.
Power tools
are dangerous in the hands of
untrained users.
e Maintain power tools. Check for
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use.
Many accidents are caused by
poorly maintained power tools.
f Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed.
Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
5 Service
a Have your power tool serviced by a
qualified repair person using only
identical replacement parts.
This
will ensure that the safety of the
power tool is maintained.
b To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
Additional safety notes for grinders
and polishers
• Wear a dust-protection mask.
Breathing in dust represents a risk to
the operator and anybody else in the
vicinity.
• Wear suitable personal protective
gear. Touching or skin contact with
dust represents a risk to the operator
and anybody else in the vicinity.
Note: When sanding, for example, paint
containing lead, as well as certain types
of wood and metal, it is possible that
poisonous dust may be generated. Take
appropriate precautions to prevent
operators and anyone else in the area
breathing in dust/coming into contact
with dust.
5456660-Dreiecksch-man_a 03.01.12 08:49 Seite 57