The product you have purchased is a 20 W LED spotlight with motion detector.
This product is intended for
illuminating outdoor areas. The product is only suitable for private use and is
not intended for commercial use or other applications. It should not be used
for household lighting. The LED spotlight is not suitable for applications other
than those described here.
Please read the operating instructions carefully before using the product. Keep
the operating instructions in a safe place so that you can refer to them if you
are uncertain or if they are passed on to third parties.
Safety information:
·
Attention! All instructions must be read. Any failure to observe the instruc-
tions given below may result in electrical shock, fire and/or serious injury.
·
Never look directly into the LED light source.
·
Protect the item against water and vibrations.
·
Fire hazard! Mount the product at a distance of at least 0.1 m from illuminat-
ed materials. Excessive heat may cause fire.
·
The housing of the LED spotlight may become hot during operation.
Ensure that the spotlight is sufficiently ventilated to allow for
heat dissipation.
·
Do not touch the LED spotlight with bare hands until it has cooled down.
·
Position the spotlight far enough away from flammable
surfaces and objects. When placing the spotlight near flammable objects,
keep a minimum distance of 1 m from the housing.
·
Keep electrical appliances and accessories away from children.
·
Never leave children unattended with the packaging material.
Packaging material presents a risk of suffocation.
Children often underestimate the dangers!
·
Keep children away from the working area during assembly work.
·
Do not use the lamp if it is damaged.
·
Disconnect the power supply before carrying out work on the LED spotlight.
·
The light source of this lamp is not replaceable. When the light source has
reached the
end of its life cycle, the entire lamp must be replaced.
·
The spotlight should be mounted on a level and stable surface.
·
Make sure the lamp is securely fixed before using it.
·
Do not immerse the item in water. Keep a minimum distance of 5 m from
swimming pools or ponds.
·
Adjusting the beam direction: turn the lamp module in the desired direction.
Burn time and daylight:
·
Turn the TIME knob clockwise to increase the burn time.
·
The burn time can be adjusted from approx. 3 seconds to 7 minutes.
·
Turn the LUX knob clockwise to increase the intensity of daylight.
·
In the Moon position the motion detector only reacts at night,
in the Sun position also during daylight.
·
Turn the SENS knob to adjust the sensitivity of the infrared sensor. It controls
the amount of movement required for the light to turn on.
Mounting the LED spotlight:
·
When drilling, be careful not to damage any electrical wiring in the wall.
·
Make sure in advance that the LED spotlights illuminate
the desired area.
·
Loosen the screws on the bottom of the spotlight
to connect it.
·
Use the mounting plate to mark the drill holes.
·
Drill the mounting holes.
·
Press suitable dowels into the drill holes and fix
the spotlight.
Cleaning:
·
Disconnect the power supply before carrying out work on the LED spotlight.
·
Wipe the product with a damp cloth only.
·
Do not use chemicals when cleaning.
Function of the motion detector:
·
The motion detector reacts to angle changes of heat radiation during
twilight or darkness caused by persons who are within the detection range of
the motion detector.
·
Detection angle: approx. 140°
·
Range: approx. 10 m
Technical data:
·
Output: 20 W
·
LED type: SMD
·
Lumen: 1,100 lm
·
Colour temperature (K): 6,500 Kelvin
·
Motion detector:
Detection angle: approx. 140°
Range: approx. 10 m
·
Protection class II
·
Protection type: IP 44
·
Voltage: 100 - 240 V~, 50 / 60 Hz
Disposal:
ATTENTION! Electrical and battery appliances that are no longer usable must
not be disposed of with household waste!
In accordance with the 2002/96 EC directive for waste electrical and electronic
equipment, they must be collected separately and recycled in
an environmentally friendly and professional manner.
Please dispose of electrical equipment that is no longer usable at a local
collection point. Collect packaging materials
separately by type and dispose of them in accordance with local regulations.
For details, please contact your local authority.
Warranty:
Warranty claims are in accordance with legal regulations.
No. WU7490100
Operating instructions
20W LED outdoor spotlight with motion detector
Conmetall Meister GmbH
Hafenstr. 26
29223 Celle
GERMANY
www.conmetallmeister.de
