1 – Scope of delivery
• 1 Fitter‘s screwdriver
• 1 Bit
• Operating Instructions
• Guarantee
2 – Technical information
Technical data
Power supply
230 V~/50 Hz
Rated requirement
710 W
Speed
n
0
: 0–2 500 min
-1
Supply cable
300 cm
Screw diam.
max. 6,35 mm
Tool fixture
6,35 mm
1
/
4
"
Weight
1,8 kg
Technical changes reserved.
Noise emission/vibration
Sound level L
pA
: 78,63 dB(A),
Sound power level L
WA
: 89,63 dB(A),
K
pA
: 3 dB(A), K
WA
: 3 dB(A).
Hand/arm vibrations
Screw-driving: a
h
: 1,621 m/s
2
, K: 1,5 m/s
2
.
Noise/vibration information
Measured values determined in
accordance with EN 60745-1.
The specified vibration emission value
was measured in accordance with a
normed test procedure and can be used
to compare one power tool with another.
The specified vibration emission value
can also be used for an introductory
estimation of exposure.
CAUTION! The vibration
emission value may fluctuate
from the specified value during actual
use of the power tool. These
fluctuations will depend on the way in
which the power tool is used.
Safety measures must be taken in
order to protect the operator. As a
result, the evaluation of the influence
must be made whilst taking account
Operating instructions & safety hints
To prevent injury, always read the operating instructions before use and
pass them on to any future owners of the tool. Keep with the tool.
GB
Page
1 – Scope of delivery
29
2 – Technical information
29
3 – Components
30
4 – Correct use
30
5 – General safety
instructions
31
6 – Safety instructions
relating specifically to
the equipment
33
Page
7 – Installation and setting
34
8 – Operation
34
9 – Mode of operation
34
10 – Maintenance and
environmental
protection
35
11 – Service instructions
35
Contents
29
5451520-Trockenbau_man 09.01.15 07:24 Seite 29
