117
When you operate the On/Off switch with integrated
light switch (5), the LED working light will also
be activated to ensure better visibility and safer
operation in darker locations. The working light goes
out when the On/Off switch is released.
• Setting the direction of rotation
The cordless screwdriver can be used to screw
screws in or out. In order to set the direction of
rotation, proceed as follows:
1.
Screwing screws into place:
Push the switch for right/left operation (6) to the
right side of the screwdriver handle (3) in the
housing.
2. Position the screw bit centred on the screw head.
3. Carefully push the On/Off switch with integrated
light switch (5).
The screw bit and bit holder rotate to the right;
the screw rotates in the wood.
4.
Screwing screws out:
Push the switch for right/left operation to the left
side of the screwdriver handle in the housing.
5. Position the screw bit centred on the screw head.
6. Carefully push the On/Off switch with integrated
light switch.
The screw bit and bit holder rotate to the left, the
screw rotates out of the wood.
MW-5450080-Bedien-1903.indd 117
05.04.19 11:58
