115
Warming of the power supply/charger (9) when
connected to the mains power, during and after
charging, is normal and does not represent a fault.
Note: The charging plug (10) of the power supply/
charger (9) may also be connected directly to the
charging socket (4) of the cordless screwdriver.
CAUTION! After 3 hours, the charger should
be disconnected from the power.
8 – Operation and usage
Inserting tools
Screwdriver bits with a length upwards of 50 mm
can be inserted directly into the bit holder (8). To
accommodate all other bits, proceed as follows:
1. Insert the magnetic bit holder (11) as far as it will
go into the bit holder.
2. Choose a bit to suit the screw.
3. Insert the selected bit as far as it will go into the
magnetic bit holder.
Switching on and off
NOTE:
Risk of damage!
MW-5450080-Bedien-1903.indd 115
05.04.19 11:58
