Install device in pipe system
Personnel:
n
Qualified personnel
Protective equipment:
n
Protective gloves
Tools:
n
Fixed spanner
CAUTION!
Do not hold the device by its
threads. These are sharp
edged and may cause injury.
1.
Place the threaded end of the
device onto the thread of the
connecting pipe
Fig. 11: Screw in the device
2.
Fasten the adapter union of the
pipeline with an appropriate
spanner (Fig. 11/1). When doing
so, lock the process connection
of the device in place to prevent
slip, using a suitable spanner
(Fig. 11/2)
Fig. 12: Screw in the device
3.
Keep turning in the adapter
union (Fig. 12/1) while holding
the process connection of the
device locked (Fig. 12/2) until
the connection is tight
4.
Repeat these steps at the other
end of the device
Installation und initial startup
Installation in the pipe system
03.09.2018
DWG Module BASICS Flow Monitor
36
