40
Even when the device is being used
properly, there always is a residual risk
that cannot be excluded. The following
potential hazards are inherent in the type
and construction of the device:
• Contact with the unprotected sanding
or polishing surface (skin abrasion/
cut-wound)
• Parts flung off from parts of the sand-
ing or polishing surface (cut-wound or
blunt injury)
• Parts flung off from parts of the mate-
rial being machined (cut-wound or
blunt injury)
• Contact with sharp edges of the sur-
face being machined (cut-wounds)
• Damage to hearing if the prescribed
hearing protectors are not worn (hear-
ing loss)
• Inhalation of particles produced during
grinding deriving from sanding or pol-
ishing surface material
• Contact with saw teeth being flung off
from the saw blade and saw blade
failure (cuts)
• Kickback and flung off parts of work
pieces (hurl)
• Loss of hearing if the required hearing
protectors are not used during work
• Contact with saw teeth in on-going
operation and during maintenance
work (cuts)
• Contact with electric current caused
by defective motor housing power
supply cable (electric shock)
• Emissions posing health risks from
wood dust
ATTENTION! The tool is not suit
able for loosening tiles and
wooden cladding!
This tool is only intended for use in a
domestic environment.
ATTENTION! Any change to the
machine other than the proper
use will invalidate the guarantee.
5 – General safety
instructions for handling
power tools
WARNING! Read all safety warn
ings and all instructions.
Failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains operated (corded)
power tool or battery-operated (cordless)
power tool.
1 Work area safety
a
Keep work area clean and well lit.
Cluttered and dark areas invite acci-
dents.
b
Do not operate power tools in explo
sive atmospheres, such as in the
presence of flammable liquids, gases
or dust.
Power tools create sparks
which may ignite the dust or fumes.
c
Keep children and bystanders away
while operating a power tool.
Di s-
tractions can cause you to lose control.
5410360-Multifunkt_man.indd 40
12.06.19 07:10
Summary of Contents for 5410360
