45
Switching on (Fig. 1)
To switch the tool on, push the On/Off
button (1) to Position 1.
Switching off (Fig. 1)
To switch the tool off, push the On/Off
button (1) to Position 0.
ATTENTION! Do not lay the
machine aside until it has come
to rest!
9 – Mode of operation
• Check that the relevant tool is firmly
seated before and during any work
you carry out.
• Guide the appliance with both hands
as shown in Fig. 6.
• Always work away from the body.
• Start with a shallow working angle and
light pressure.
ATTENTION! To high an applica
tion pressure, too high a working
angle and sharpedged insertable
tools may damage the base material!
ATTENTION! Risk of injury to
user and others near him from
flying pieces! these persons should
wear safety glasses.
Tool used and appliance may heat up
during use.
Do not overload appliance and allow appli-
ance to cool down from time to time.
Insertable tools
a) Scraper (Fig. 3)
For work on hard base materials, such as
concrete, screed, etc.. For removing floor
coverings made of fabric, PVC and cork.
Removing adhesive, plaster and mortar
residues. Ensure the tool is correctly fitted.
b) Saw tool (Fig. 4)
For wood and metal work (non-ferrous
metals), for example, for plunge cuts and
for separating wood, making cable outlets
in cabinets, shortening slim profiles, cut-
ting off protruding nails.
c) Triangular sander adapter (Fig. 5)
For sanding and cleaning small surfaces,
for getting into corner etc. For removing
glue and mortar residue.
Further accessories
Further accessories and spare tools are
available at DIY outlets.
10 – Maintenance and
environmental
protection
ATTENTION! Before carrying out
any maintenance work on the
tool, switch it off and unplug it from
the mains!
Sharpening the tools (Fig. 7)
Insertable tools with cutting edges
should always be reground to ensure
good results. For this the tool should be
clamped in the appliance and the ground
side fed to the grinding medium.
For this purpose, we recommend a sta-
tionary sanding machine.
Use a corundum disk and grind wet.
5410360-Multifunkt_man.indd 45
12.06.19 07:10
Summary of Contents for 5410360
