4 Important Safety Information
Please ensure that IMS modules designed for "hot-plugging" (modules that are removable and insertable while
a system is in operation) are always handled with the utmost care.
Before performing any maintenance work on the system:
•
We recommend making a backup of any stored configurations (e.g. using a USB flash drive or from the
Web UI)
•
Take note of the chapter "Prevention of ESD Damage".
•
Take note of the chapter "Power Supply".
4.1 Additional Safety Information
This manual contains important safety information regarding the installation and use of the device. Please read
it through fully before setting up the device for use.
This device may only be used for the purpose described in this manual. In particular, the specified operat-
ing limits of the device must be heeded. The person setting up the device is responsible for safety matters in
relation to any larger system in which the device is installed!
Failure to observe these instructions may have an adverse impact on device safety!
Please keep this manual in a safe and accessible place.
Target Readership
This manual is only intended to be used by qualified electricians, or by persons who have been appropriately
instructed by qualified electricians and who are familiar with applicable national standards and safety rules &
regulations, especially in relation to the installation of low-voltage (< 1000 V) installations.
4
Date: March 2, 2022
IMS-VSG181H
