Meilhaus Electronic ME-90 Series, Electronic Manual, Page: 21 / 120

Mark the appropriate port in the device manager under „Ports“(see
Picture 1) and click the button „Properties“ in order to display the
properties.
2.3.1.1 Port Settings
For most of the application programs the „Port Settings“ done in
the device manager are not relevant. Exception: board-specific
parameters like the operation mode (see 2.3.1.2 Settings
„Advanced“). Therefore check the transfer parameters in your
application program (e.g. Hyper Terminal). The following settings
are possible:

Bits per Second: depending on board version all settings
selectable in Windows up to 921,6 kbps (see also
appendix A "Specifications", page 100)
 Data bits: 4; 5; 6; 7; 8
 Parity: None, Odd, Even, Mark, Space

Stop bits: 1; 1,5; 2
 Flow control Xon/Xoff, Hardware, None