are set to input. The assignment of the ports to the subdevices
can be found in the ME-iDS help file (see ME-iDS Control Center).
For wiring the digital ports please read chapter 3.3 on page 17.
The following operation modes are possible:
4.2.1 Simple Input/Output
The input/output of single digital values is done in operation mode
“Single”. Each digital port is accessed as a subdevice of type
ME_TYPE_DIO, subtype ME_SUBTYPE_SINGLE. Note the order of
operation as described in the ME-iDS manual. The following param-
eters can be configured by the functions
and
Determine subdevice with
…functions.
Port direction: input or output.
Port width: bit or byte operation (8 bit).
Note: Ports defined as output can also be read back!
ME-6000/6200
ME-6100/6300
✔
✔