Meikyo Electric WATCH BOOT RPC-M5C-EA User Manual Download Page 24

 

24

 

LIMITED WARRANTY

 

Product Name:             

WATCH BOOT

 

Model:                     

RPC-M5C-EA 

Serial Number: 

Date of Purchase:              Month:                    Date:            Year: 

Warranty Coverage: 12 months after purchase 

Point of Sale(Store Name・Address・Phone Number)

 

 

Thank you for your interest in the product and service of Meikyo Electric Co., Ltd. 
This limited Warranty applies to physical goods, and only for physical goods, purchased from Meikyo Electric Co., Ltd..

 

 

Warranty Stipulations 

1.  Repair and replacement services under warranty are only performed free of charge if the product was used within the 

parameters defined in the user’s manual and the label(s) adhered on the unit. A customer must present this warranty 
document upon seeking these services free of charge.   

2. 

Meikyo Electric Co., LTD. shall not be liable for any direct and indirect damages resulting from the malfunction of the 
product.

 

3. 

The following situations may result in the customer being charged fee(s) for repair/replacement services, even during the 
period covered by warranty:

 

a.  When the customer cannot present valid warranty documentation 
b.  If the presented warranty documentation is missing or had gone through tampering of information such as date of 

purchase, serial number, point of sales, etc. 

c.  When damages are the result of improper handling of the product, such as dropping the product during transportation 

or shipment. 

d.  Damages resulting from misuse, abuse, disassembly, repair, or modification of the product. 
e.  Damages resulting from fire, gas, earthquake, lightning, water, wind, or any other natural events which may cause 

unusual electrical load on the product. 

f. 

Any damage caused by devices other than those designed and manufactured by Meikyo Electric Co., LTD 

4.  This warranty is valid only in USA. 
5.  This warranty documentation will not be replaced if the original copy is destroyed, misplaced, or stolen. Please store this 

warranty documentation in a safe location. 
 

* This warranty serves to provide repair services free of charge only during its effective period and only when the product is 

operated under parameters defined in the user’s manual. Therefore, this warranty is not meant to limit the buyer’s legal rights 
and privileges. Please contact Meikyo Electric Co., LTD if repair/replacement services are required after the warranty period.   

* This warranty does not cover damages or loss of data in data storage devices (hard disks, floppy disks, RAM, etc.) under any 

conditions.   

 

<How to get service for the product> 

A customer must send an email for the service requirement to 

[email protected]

.jp in a timely manner. Meikyo Electric Co., 

Ltd. will provide the customer with a Return Merchandise Authorization(RMA) number. The product must be returned in its 
original packaging with the provided RMA number.    Any documents or accessories that shipped with the product must be 
included in the package. 

Summary of Contents for WATCH BOOT RPC-M5C-EA

























Reviews: