12
8. Basic settings: Set up device and outlet names.
Device Setting
Device name: Set the device name.
(up to 19 single-byte characters)
Location: Enter the location description.
(up to 63 single-byte characters)
Outlet Setting
Outlet name
Assign a name for each AC outlet.
(up to 20 single-byte characters)
Configure OFF delay, Reboot delay, ON delay, and start delay.
(seconds)
Set reboot time for all outlets.
Outlet Link setting
Outlet Link: Assign outlets to link together.
Front Panel Setting
LED Status by LED: Set to “Enabled” or “Disabled”.
9. Time setting: Synchronize with a PC or NTP server.
Time Setting: Synchronize device time to the connected PC
NTP Settings: Enter the desired NTP server address.
NTP Interval: Control how often the device accesses the NTP
server. (1 = 10 min)
Time Zone: Select a time zone.
Daylight Saving Time: Enable / Disable Daylight Saving Time.
