Operating instructions for trolley washing machine model WS 125
9648649
Design and construction subject to change without prior notice!
Page
19
of
38
PROGR. START
After displaying "OPERATING MODE" in the touch panel, the machine is put into
operation with the
"PROGRAM START"
button.
The machine takes control of all other functions (such as monitoring the wash tank,
rinsing and drying temperature, loss of water in the wash tank, etc.), thereby eliminating
the need for further control or operation.
RESET
Washing can be temporarily interrupted with the
"RESET"
button; i.e. the wash pumps
and transport are switched off.
However, the tank heating elements are not switched off with the result that the machine
remains ready for operation and washing can recommence when the button
“OPERATION”
is pressed.
FILLING/HEATING OFF
With the key
„FILLING/HEATING OFF“
the machine is completely set out of operation.
(Note! "Cleaning the machine")
EMERGENCY STOP
EMERGENCY STOP
The machine has one or more emergency off switches. This enables the entire machine
to be shut down. Restarting the machine requires unlocking the emergency off switch and
is only possible in the switch cabinet.
The machine must be restarted only once it has been established that the hazardous
situation triggering the emergency stop has been rectified and restarting the machine will
not cause any danger.
EMERGENCY STOP
safety pull wire
EMERGENCY STOP safety pull wire
On the window side of each chamber on the inside of the machine, the
machine is equipped with an EMERGENCY STOP safety pull wire. The pull
wire operates identically to an EMERGENCY STOP switch.
It allows to shutdown the entire machine. Restarting the machine requires
unlocking the blue emergency off switch and is possible in the installation room
only, at the machine input and output.
The machine must be restarted only once it has been established that the
hazardous situation triggering the emergency stop has been rectified and
restarting the machine will not cause any danger.
Function message lamp
The following functions can be recognized:
Red lamp:
In the event of a collective malfunction, the red lamp flashes, and lights
up permanently if the EMERGENCY STOP switch is pressed.
White lamp:
Program executing
Green lamp:
Program end
Summary of Contents for WS 125
Page 38: ......