Operating instructions Glass-, utensil- and dishwasher
M-iClean U
Maintenance and cleaning
9763258
64 / 72
Design and construction subject to change without prior notice!
7. Check seal: connect water and power supply. Fill
machine or run a cycle.
8. Mark date label and apply to filter unit.
9. Replace any covers removed.
10. Reset maintenance counter in control, see chap-
ter “Reset the counter” on page 55.
Marking the label
1. Remove old label (if present).
2. Apply new label to casing so that it is clearly visible.
3. Make visible the date for the next filter change: in 6 months' time for a standard
membrane, in 3 months' time for a chlorine-resistant membrane. Use a perma-
nent marker or similar for this. The picture shows an example of a filter change
date in July (marked: 7) 2014 (marked: 14)
10.4
Daily cleaning
Beware
Danger of burns and scalding due to hot rinse water, washware and machine
parts
Contact with hot rinse water, washware and machine parts can result in
burns/scalding of the skin.
• Wear protective gloves if necessary.
• Let the washware cool down before emptying, if necessary.
• Let the machine cool down before touching machine parts, if necessary.
• Never open the machine door or hood during a wash cycle.
• Only open and close the hood/door using the designated handle(s).
,
