Meiko M-iClean U Series, Translation Of The Original Operating Instructions, Page: 29 / 72

Operating instructions Glass-, utensil- and dishwasher
M-iClean U
Commissioning
9763258
29 / 72
Design and construction subject to change without prior notice!
8 Commissioning
Warning
Danger of injury due to entry into a danger zone
Unauthorised persons might be in or enter the danger zone during transport, as-
sembly, commissioning, maintenance and repair work. This can lead to injuries.
• Only qualified persons should perform work at and with the machine.
• Remove unauthorised persons from the danger zone.
• Block off danger area and mark it for third parties.
• Never remove or disable safety devices on the machine.
8.1 Check prerequisites for commissioning
Caution
Material damage due to steam escape
Small quantities of steam may escape through the dishwashing machine's door
area. It is possible that adjacent furniture can swell up.
• Protect adjacent furniture from swelling up.
• If possible, avoid installing the machine in an area close to sensitive furniture.
Prerequisites to be provided by the customer:
• Consistently frost free storage and installation area.
• Anti-slip floor coverings installed in the work area around the dishwashing ma-
chine.
• Electrical connection in accordance with the dimensional drawing.
• Fresh water connection in accordance with the dimensional drawing.
• Waste water connection in accordance with the dimensional drawing.
8.2 Perform commissioning
Note
Instruction and initial commissioning may be performed only by an authorised ser-
vice technician! The operator must not use the dishwashing machine before com-
pleting training.
To avoid damage to the appliance or dangerous injuries during commissioning of the
machine, please note the following points:
• Check supplier parts (e.g. external water processing devices or heating
pumps). More detailed information can be found in the relevant operating in-
structions.
• Ensure that all tools and foreign parts are removed from the machine.
• Make sure that any escaped fluids have been removed.
• Before commissioning, activate all safety systems and door switches (on under-
counter machines).
• Check all screw connections sit securely.
• For dishwashing machines with GiO Module, attention must be paid to the
"Commissioning certificate for GiO Modules" and the instructions adhered to
accordingly.