MT-10
Series
Compound Microscope
INSTRUCTION MANUAL
Maintenance of the stand
Dust can be removed with a brush. In case the stand or table is really dirty the
surface can be cleaned with a non-aggressive cleaning product.
All moving parts like the height adjustment or the coaxial course and fine
adjustment contain ball bearings that are not dust sensitive. With a drop of
sewing-machine oil the bearing can be lubricated.
Changing the batteries of the MT-30/MT-90 series
Caution:
Always remove the power cable from the main supply !
•
Remove the smal lid out of the bottom cover of the microscope.
•
Place the batteries and put the lid back into its place.
Tension control setting
Between the right-handed coarse adjustment knob and the microscope stand
there is a ring for the tension control setting. By means of turning it clock- or
counter clockwise the tension of the coarse adjustment knobs can be adjusted.
100 Lauman Lane, Suite A, Hicksville, NY 11801
Tel: (877) 877-7274 | Fax: (516) 801-2046
Email: [email protected]
www.microscopeinternational.com
'LVWULEXWHGE\
