9
4
5
4a
5a
Tap the spring pin(s) (2) into the (new) sleeve (1).
Caution:
Ensure that the holes in the sleeve (1) are aligned
with the opening in the bracket(s) that are
welded onto the piston rod(s). DO NOT tap the
spring pin onto the bracket or piston rod!
Tools required
: Hammer.
Slide the (new) sleeve (1) over the fork.
Applies only to: KOOI-REACHFORKS® type TRG2
;
Slide the (new) inner sleeve (8) onto the fork. Tighten the
screws (6) (on both sides in the stops (7). Lock the screws
(6) with Loctite 270
1
.
Tools required:
Allen key 4, Loctite 270
1
.
Applies only to: KOOI-REACHFORKS® type TRG2
;
Place the stops (4) in the outer sleeve (5). Tighten the
screws (3) (on both sides od the sleeve). Lock the screws
(3) with Loctite 270
1
.
Tools required:
Allen key 4, Loctite 270
1
.
1
See www.loctite.com
