5
1
2
3
4
5
Bleed the hydraulic system:
• Tilt the forklift truck mast forwards and back-
wards several times.
• Tilt the forklift mast forwards and slide the KOOI-
REACHFORKS® in. Operate the lever for about 30
seconds so that the KOOI-REACHFORKS® remain
retracted and they are flushed.
• Extend and retract the KOOI-REACHFORKS®
several times.
Check that hydraulic hoses are unobstructed and that
there are no oil leakages.
The KOOI-REACHFORKS® type plates are
stamped with an ‘L’ and an ‘R’. Mount the KOOI-
REACHFORKS® on the left (L) and right (R) as
viewed from the forklift operator’s seat.
Assembly
Slide the KOOI-REACHFORKS® onto the carriage plate.
Make sure that each of the KOOI-REACHFORK® lock-
ing pins (2) drops into one of the notches on the carriage
plate. Use catch (1) before operating.
Connect the KOOI-REACHFORKS® to the hydraulic sys-
tem.
Type KOOI-RE
-
ACHFORKS®
Recom
-
mended oil
flow
Recom
-
mended hose diameter
Maximum operating pressure
Connection
RG2 /
RGE2 /
RGN2 /
TFG2 /
TRG2
7,5-12,5 (L/
min)
2-3.3 (gal/
min)
3/8”
250 bar
(3626 psi)
12L /
7/16”
JIC
(USA)
/ 9/16”
(USA)
RG4 /
RGE4
12,5-20 (L/
min)
3.3-5.3
(gal/ min)
